Contents
INTRODUCTION
Using the Antenna
®
Telescope
™
Workspaces
Installation Instructions and Parts Manual 4
Installation Gauge (YBIG- Package Qty of 5) 5
DESKS AND TABLES
Desk (Inset Legs) 10
Table Desk (Flush Legs) 12
Desk with Return (Inset Leg on Return) 14
Table Desk with Return (Flush Leg on Return) 16
Table Desk or Desk with Bridge 18
Desk with Extension Top or Cabinet (With Legs Under Worksurface) 20
Desk with Above Desk Extension Cabinet (With Legs under Cabinet) 22
Back-to-Back Desks 24
Linked Desks 27
Big Table with Inset Intermediate Leg 29
Big Table with Intermediate Leg (Non-Inset) 34
Mid Span Support Leg for Center Beam for 36"D Big Table 38
Center Beam End Caps 40
Beam Mounted Finger Bracket for Hinged Access Tops 42
Big Table with Return 43
Big Table with Back-to-Back Returns 45
Big Table with Extension Top or Cabinet 48
Sapper Monitor Arm and Cantilever Shelf: Center Beam Attachment 51
Electrical Components
Electrical Components: Power for Desk Rail 55
Electrical Components: Power for Big Table Center Beam 57
Electrical Components: Surface Mounted Plugmold Raceway 59
Vertical Wire and Infeed Manager 61
Electrical Components: Communications Mounting Box 63
Electrical Components: Desktop Outlet Center Module and Desk Mounted Shroud 65
12" Deep Big Table Cable Basket and 6" Deep Data Cable Basket 67
Cable Management: Wire Basket Cover (pair) and End Cap (pair) 70
Fence
Fence-Antenna Leg & Stabilizer Foot 73
Desk Supported by 25"H or 28 ½"H Fence 75
To Next Page
Loading...