Kodak 9000C - PC System Requirements

PC System Requirements
KODAK 9000C and KODAK 9000C 3D Extraoral Imaging System Installation Guide (SM714)_Ed 01 4–9
PC System Requirements
This section specifies the minimum PC system requirements for KODAK 9000C and KODAK
9000C 3D extraoral imaging system software.
IMPORTANT
It is MANDATORY to check that the PC system configuration is
compatible with the PC system requirements for the KODAK 9000 and
KODAK 9000 3D software. If necessary you MUST update your PC system
configuration. KODAK 9000C and KODAK 9000C 3D MUST be connected
to the PC via a point-to-point Ethernet link and not via a LAN. DO NOT
place the PC and the peripheral equipment connected to it in the immediate
vicinity of the patient in the unit. Leave at least 1.5 m distance from the
unit. The PC and the peripheral equipment must conform to the IEC 60950
standard.
IMPORTANT
For KODAK 9000C, you can use the “Viewing” graphic board configuration
for acquisition.
Table 4–4 Minimum PC System Requirements
Item Viewing
Acquisition *
Comments
CPU 2 GHz Intel Duo Core 3 GHz Intel Pentium 4
RAM 2 GB 2GB RAM has a major impact on
system performance.
Hard disk drive
• 1.2 GB for software installation
• 80 GB free space to use the
software
1.2 GB for software installation
Graphic board Nvidia / ATI based board supporting
Open Glide 1.2 with 256 MB of video
RAM on AGP x8 video bus (example:
Nvidia GeForce 6800 GT)
Nvidia board on PCI Express video
bus, minimum GeForce 8800 GT
512 MB of video RAM, or Quadro
FX 4600 768 MB of video RAM
The video RAM has major impact
on system performance.
Monitor
• 1 monitor
• 17" or larger
• 1024 x 768 minimum screen
resolution - 32 bits color mode
• 1 monitor
• 17"
• 1280 x 880 minimum screen
resolution
Your monitor is a vital component
in displaying quality images.
Low-quality screens will prevent
you from proper diagnoses and
treatment.
Operating system
• Windows 2000 SP4
• Windows XP Home / Pro
edition SP2
• Windows Vista 32 bits
Windows XP Home / Pro edition
SP2
Ethernet interface 1 Ethernet interface 2 Ethernet interfaces (100Mbits)
CD/DVD drive A CD-ROM drive is required to install
the product.
A CD-ROM drive is required to
install the product.