Kodak 9000C - Fitting the Cephalostat Covers

Fitting the Covers
KODAK 9000C and KODAK 9000C 3D Extraoral Imaging System Installation Guide (SM714)_Ed 01 5–25
Fitting the Cephalostat Covers
To fit the cephalostat covers, follow these steps:
1. Fit the cephalostat end of the arm cover (A) and screw the fixing screws.
2. Fit the cephalostat head side covers (B) and screw the fixing screws.
3. Fit the cephalostat head top cover (C) and screw the fixing screws.
B
5 x
M5x12
2 x
M5x16
A
C
4 x
M5x12