Fitting the Covers
5–24 INSTALLING THE CEPHALOSTAT
4. From below the unit head, slide the protection plate (D) between the rotation axe and the
unit head.
From above the unit head, access and tighten the accessible fixing screws. Switch ON the
unit. Press and hold to position the rotative arm so that you can access the
inaccessible fixing screw. Switch OFF the unit. Access and tighten the fixing screw.
5. Fit the 2 under the head covers (F) and (G) under the head and tighten the fixing screws.
6. Fit the right side column cover (H), position and attach the ON/OFF button to the cover
securely with the fixing screws.
7. Fit the left side column cover (J) on the column and tighten the fixing screws.
8. Fit the inside column cover (K) to the column and tighten the fixing screws.
9. Fit the head cover (L) of the unit to the head chassis and tighten the fixing screws.
You can switch on the unit now.
To Next Page
Loading...
