Kodak 9000C - Installing the Cephalostat; Tool Requirements; Technical Staff Requirements

KODAK 9000C and KODAK 9000C 3D Extraoral Imaging System Installation Guide (SM714)_Ed 01 5–1
Chapter 5-
INSTALLING THE CEPHALOSTAT
Tool Requirements
The installer must supply the following tools:
• Power drill
• Screws and heavy duty fixings
• Spirit level
• Measuring tape
• Cutter
• Metric Allen keys
• Metric spanners
Technical Staff Requirements
The installation requires the following number of technicians:
IMPORTANT
The tool references mentioned in this manual are ISO tool
references.
Unit Component Technicians
Arm 2
Head 2