Installing the Cephalostat Unit
KODAK 9000C and KODAK 9000C 3D Extraoral Imaging System Installation Guide (SM714)_Ed 01 5–5
Installing the Cephalostat Head
4. With the help of 1 person, lift the cephalostat head and insert the elbow tube (A) inside the
elbow tube clamps (B).
5. Insert the elbow tube (A) as far as the height adjustment sign (C). Screw the fixing screws
but do not tighten them.
6. Correctly position the cephalostat head using a spirit level (D) placed on the side of the
cephalostat head. Tighten the fixing screws.
6 mm
C
A
B
D
To Next Page
Loading...
