A-61931 April 2021 23
3 Scanning
Scanner display and buttons:
S2040/S2050/S2070 scanners
The scanner screen display is used in different ways during the different
scanner states:
• Ready
• Scanning
• Pause
• Settings
• Waiting
When the scanner has gone into Energy Star sleep, the scanner screen
is dark.
Ready
When the scanner is ready to start scanning, the scanner screen tells
you what the scanner is prepared to do (e.g. by displaying the current
activity for your Kodak scanning application) and which of the scanner
buttons are available.
When the scanner is ready, you can:
• See the scan setting name — if you are using a Kodak scanning
application, you will see activity names.
• Scroll up and down the list of predefined scanning settings, using the
up and down scrolling buttons. The up button will count up to the
next scan setting number, i.e. from setting 1 to setting 2.
• Start scanning, using the Play button.
If you want to view or adjust scanner capabilities, from the Ready state
you can go to the Settings menu, using the button.
NOTE: If you are not using a scanning application that
enables scanning from the scanner, you will see
this display on the scanner screen. From here
you can access Settings using the button.
Scanning
When the scanner is scanning, the scanner screen
shows the number of pages scanned since the last time
you stopped scanning. While scanning you can use
the button, to pause scanning or to end scanning
and complete this document.
To ignore multifeed warnings for a document, press and hold the Play
button while that document is transporting through the machine.
For example, if you are scanning mail, you can hold down the Play
button when the envelope passes through the scanner.
To Next Page
Loading...
