A-61931 April 2021 25
3 Scanning
Scanner settings
When you are not scanning you can reach the Settings
menu with the button. Settings offers these options:
• Information gives you a few key facts about your
scanner, such as firmware version.
• Calibrations lets you calibrate the multifeed detection
system.
NOTE: Multifeed calibration is needed rarely and should be done
only if a Technical Support person instructs you to calibrate,
or if the scanner has been moved to a location at a high
elevation.
• Maintenance gives you the ability to record performance of important
scanner maintenance, such as scanner cleaning.
Scanner display and buttons:
S2060w/S2080w scanners
Conventions in the S2000w display screens
The Status bar on the display
screen shows connections for the scanner: USB, wired network,
wireless network, or wireless directly.
The Back button goes back once.
The Next button advances to the next screen.
The menu icon leads to network and power Settings.
This icon beside a menu option means you have a choice of “on”
or “off” for the option:
The colored icon means “on” and the gray icon means “off.”
To Next Page
Loading...
