20 A-61931 April 2021
3 Scanning
Sharing the S2060w/S2080w scanner among multiple PCs
NOTE: This section is relevant only for scanning with button-enabled
applications which allow scanning to be initiated at the scanner
(requires a Kodak scanning application).
By default, the S2000w scanners (the network scanners):
• will allow any PC or mobile device to connect over an enabled wired
or wireless connection.
• are in multiple PC mode. Multiple PC mode enables unlimited access
by PCs using TWAIN, ISIS or WIA drivers over a network connection.
Up to 10 PCs with button-enabled applications installed will be
displayed on the scanner screen. Limiting scanner access to a single
PC is explained in “Restricting use of the S2060w/S2080w scanner to
one PC” on page 22.
Setup for sharing the network scanner among PCs:
1. The S2060w or S2080w scanner is configured for wireless or wired
connections.
2. Several PCs or laptops install the S2000w scanner driver and install
a Kodak scanning application.
3. The users may optionally add a 4-digit numeric network security PIN
to their Kodak scanning application configuration.
4. The users may set up custom activities in a Kodak scanning
application, based on their needs. For example, users may set up
an activity to scan to their own One Drive account.
Usage Example:
1. The S2060w or S2080w Scanner is turned on.
2. The three PCs that are on the network connect to the S2000w
scanner. The logged in user name and account picture are
displayed on the scanner screen list of users.
To Next Page
Loading...
