A-61931 April 2021 35
3 Scanning
Handle with extra care
For fragile paper that you can’t risk damaging, put each page into a
document sleeve (to order Kodak Carrier Sleeves (5 packs), refer to the
link for your scanner in “Supplies and Consumables” on page 51). To
enable scanning with a carrier sleeve, refer to the TWAIN or ISIS driver
help or set-up guides. Set-up guides are available on the support page
for your model. For a list of support page links, see “Active Feeding” on
page 31. Then:
• Put the paper in the sleeve and scan.
NOTE: Intelligent Document Protection should be off when scanning
with a carrier sleeve. See “Handle with care” above.
If you regularly scan fragile paper, you should consider adding a Kodak
flatbed accessory. To see Kodak flatbed accessories available, refer to
the link for your scanner in “Supplies and Consumables” on page 51.
Oversize paper
If you want to scan paper that is wider than the input opening of the
scanner but less than twice that width, you can scan it folded, in a
sleeve accessory (to order Kodak Carrier Sleeves (5 packs), refer to
the link for your scanner model in “Supplies and Consumables” on
page 51). To enable scanning a folded document, refer to the TWAIN or
ISIS driver help or set-up guides. Set-up guides are available on the
support page for your model. For a list of support page links, see
“Active Feeding” on page 31. Then:
• Fold the paper in half so it fits into the sleeve.
• Both sides of the sleeved document will be scanned, and the images
will be merged into one.