A-61931 April 2021 39
4 Maintenance
Scanner meters
Your scanner has several meters with information about when to clean
and replace various scanner parts. Using the meters will help to
maintain image quality and scanning performance.
To see the meters display, choose Maintenance at the scanner screen.
The meters display will show the tools symbol in either teal (cleaning or
replacement limit not reached) or yellow (time to clean or replace):
Choosing Meters from this screen will display the number of scans
since the last cleaning or part replacement, and the number at which
cleaning of the scanner or replacement of the part is needed.
Choosing Reset for Clean or Feed Kit will turn the count back to 0
(number of scans since the last cleaning/replacement).
NOTE: Tire replacement refers to the separation roller assembly. Feed
roller tire replacement should not be needed. The feed roller
assembly may be replaced if needed, though it is expected to
perform well for normal life of the scanner.
No cleaning or
replacement needed
Time to clean or
to replace a part
Meter counts (scans
since last cleaning or
replacement)
To Next Page
Loading...
