38 A-61931 April 2021
3 Scanning
7. Image merge: Front and back images can be merged into one —
e.g. the front and back of a check can become one image.
8. Dual stream: You can receive both a black and white and a color (or
grayscale) image of the scanned page, for front, back, or both sides.
Turning the scanner off
To turn the scanner off, touch the power button for 1 second.
NOTE: The Power Off energy saver feature will also turn the scanner
off after an extended period of time in power saver mode. The
default is 15 minutes. For the S2040/S2050/S2070 scanners
you can configure this period of time using your scanning
application. For the S2060w/S2080w scanners, configure on the
scanner touch screen or embedded web site.
“Wake up” actions
From off
• Press the scanner power button.
From standby/sleep
Any of the following will wake the scanner from low power mode:
• Press the scanner power button.
• Put paper into the input tray.
• Use a scanning application that is connected to the scanner.
• On the S2060w/S2080w scanners, touch the scanner screen.
• Access the scanner over USB for the S2040/S2050/S2070, or on
wireless network, USB, or Ethernet for S2060w/S2080w.
NOTE: PC wake-up will not wake up the scanner from either Energy
Star or power off.
To Next Page
Loading...
