November 2014 3-1
3
Maintaining the Printer
To ensure good printer performance and high-quality prints, make
sure the KODAK D4600 Duplex Photo Printer and its environment
are clean and dust free.
Performing Routine Maintenance
To maintain good print quality, clean the exterior (see page 3-3) of
the printer and the filters regularly (see page 3-4) to eliminate
dust buildup and prevent debris from entering the printer.
In addition, each time you change the ribbon, clean the following
parts:
• thermal print head and peel rollers (see page 3-6).
• platen roller (see page 3-8).
• pinch roller (see page 3-8).
• cleaning rollers (see page 3-10).
Make sure you have the KODAK Thermal Printer Cleaning Kit
available. This kit contains 10 individually packaged alcohol pads.
Alcohol is a flammable liquid. It can cause eye irritation and
dry skin. Wash your hands with soap and water following
any maintenance procedures where you use alcohol pads.
For additional information, see the Material Safety Data
Sheet (MSDS).
For health, safety, and environmental information in the United
States, call 585-722-5151. Customers outside the United States
should contact their local customer service representative.
To Next Page
Loading...
