November 2014 4-1
4
Operating the Printer
Making Prints
You make prints using photo printing software applications. For
application-specific printing information, see the user’s guide or
online Help for the software application.
Handling and Storing Prints
For best results:
• Make sure hands are clean and free of food, oil, and grease.
• Store prints in a cool, dry environment free of chemical
contamination.
• Store prints at temperatures below 25° C (72° F) for extended
periods.
• Store prints at a relative humidity between 30-50%.
• Avoid exposure to high-intensity light sources, particularly
fluorescent light and sunlight, which are rich in ultraviolet
radiation.
• Avoid exposure to vinyl items (those made of polyvinyl chloride,
PVC) and any plastic that contains plasticiser. If you use
transparent sleeves, make sure they are not PVC-based.
Operator Panel Lights
Light Colour Printer Status
Power Orange The printer is initialising.
Solid
Green
The printer is ready to make prints.
Error Red An error has occurred. See the message
on the operator panel, then see
“Resolving Operator Panel Status/Error
Messages” on page 5-2.
To Next Page
Loading...
Need help?
General