5-4 November 2014
Tro u b l es h o o ti n g
Clearing a Paper Jam
If a Paper Jam message appears on the operator panel, follow this
procedure.
1. Move the power switch to the On ( | ) position.
2. Remove the exit tray from the front of the printer.
3. Remove and empty the exit tray waste bin.
NOTE: To keep your prints dust-free and to prevent paper jams,
empty the waste bin each time you replace the paper.
4. Open the front of the printer.
• Press the release button.
• Pull the front of the printer forward until it stops.
5. Open the top door of the printer.
To Next Page
Loading...
