Troubleshooting
November 2014 5-5
6. Remove the front door waste bin:
a. Grasp the waste bin by the handle.
b. Pull the waste bin towards you. Lift it up and out of the
printer.
7. Empty the waste bin.
NOTE: To keep your prints dust-free and to prevent paper jams,
empty the waste bin each time you replace the paper.
To prevent damage to the printer, do not pull abruptly on the
paper.
8. Use both hands to manually rewind the paper onto the roll.
The thermal print head becomes extremely hot during normal
operation and fingerprints can damage it. Never touch the
thermal print head. Do not allow any objects to fall onto the
thermal print head.
9. Wait approximately five minutes to allow the thermal print
head to cool.
CAUTION: HOT
Thermal print head
To Next Page
Loading...
