5
1
Using an AC Adapter
If you are taking pictures indoors or when the camera is connected to a
computer, you may want to use a Kodak-specified AC adapter to help
conserve battery power. It is important to use only a Kodak-specified AC
adapter with your DC240/DCD280 camera. If you do not have a Kodak-
specified AC adapter, you can purchase one as an accessory. For details
about available accessories, ask your dealer of Kodak products, or visit
our Website at http://www.kodak.com/go/accessories.
1 Slide the POWER switch to the right to
turn off the camera.
2 Open the AC adapter port door on the side
of the camera.
3 Plug the appropriate end of the AC
adapter into the port on the camera.
4 Plug the AC adapter into the power outlet.
Depending on where you live, some AC
adapters are supplied with power plugs
that are not attached. If you have that type
of adapter, use the type of plug that
matches your power outlet.
5 Slide the POWER switch to the right to
turn on the camera.
The camera is now powered by the
AC adapter.
DC IN
VIDEO
OUT
OPEN
CARD
_
+
To Next Page
Loading...
Need help?
General
