29
3
Adjusting the ISO Setting (DC280 only)
If you are taking pictures in low light without flash, such as in a museum,
you can adjust the Auto ISO sensitivity on the camera to help prevent
blurred pictures caused by camera movement. With this feature the
shutter speed is automatically increased to make the camera more
responsive, while maintaining proper exposure for the picture.
1 Set the Mode dial to Capture.
2 Slide the POWER switch to the right
to turn on the camera.
3 Press the MENU button.
The LCD displays the main Menu screen.
4 Press a button until the
icon is highlighted.
The LCD displays the Auto ISO screen.
The current setting is (
ä
).
5 Press the DO-IT button.
6 Press a button until the option
you want is highlighted.
q
OFF—camera selects the optimal
shutter speed for pictures. Ideal
for everyday picture-taking.
q
ON—camera increases the shutter
speed when flash is turned off.
Ideal for indoor pictures in less
than optimal lighting.
7 Press the DO-IT button.
8 To cancel Auto ISO, press
a button until OFF is
highlighted, then press the DO-IT
button, or turn off the camera.
/
/
/
To Next Page
Loading...
Need help?
General
