55
5
Setting an Auto ISO Default (DC280 only)
If you are always using your camera indoors without flash, you can set
the camera so it uses a faster shutter speed to help avoid blurry pictures
from camera movement. For more information about the Auto ISO
feature, see page 29.
1 Set the Mode dial to Camera Setup.
2 Slide the POWER switch to the right to
turn on the camera.
The main Camera Setup screen appears.
3 Press a button until the
icon is highlighted.
4 Press the DO-IT button.
The Auto ISO Default screen appears. The
current setting is checked (
ä
).
5 Press a button until the Auto
ISO option you want is highlighted.
q OFF (Main Default)—camera
maintains optimal shutter speed
ranges. Ideal for everyday pictures.
q ON—camera increases shutter speed
when flash is off. Ideal for indoor
pictures in less than optimal lighting.
6 Press the DO-IT button to accept the
changes and return to the main Camera
Setup screen.
/
/
To Next Page
Loading...
Need help?
General
