40
Running a Slide Show on Your Television
You can view your pictures on the camera LCD, or connect your camera
to a television and display your pictures to a large audience using the
Slide Show feature. The pictures appear on the television for a period of 1
to 99 seconds, a time you set from the camera. The slide show ends after
all the pictures have been shown; or, if you are using a Kodak-specified
AC adapter, the slide show continues until you stop it.
1 Set the Mode dial to Review.
2 Slide the POWER switch to the right to
turn on the camera.
The last picture taken appears on the
LCD screen.
3 Press the MENU button.
The main Review Menu screen appears.
4 Press a button until the icon
is highlighted.
5 Press the DO-IT button.
The Slide Show Interval screen appears.
6 Use the buttons to select the
number of seconds you want the pictures
to appear on the television.
If you want to view a slide show on the
camera LCD, press the DO-IT to start and
stop the slide show.
7 Insert the video cable into the video-out
port on the side of your camera, and
connect the other end of the video cable to
the video-in port on the television.
8 Turn on the television.
You may need to adjust the Video Out
setting to NTSC or PAL television signals.
See page 49 for details.
9 Press the DO-IT button to start and stop
the slide show.
/
/
To Next Page
Loading...
Need help?
General
