52
Setting a White Balance Default
If you are always using your camera indoors where flash is prohibited,
you can set the camera so it is balanced for the type of light source that
you take pictures under. For more information about the White Balance
feature, see page 27.
1 Set the Mode dial to Camera Setup.
2 Slide the POWER switch to the right to
turn on the camera.
The main Camera Setup screen appears.
3 Press a button until the
icon is highlighted.
4 Press the DO-IT button.
The White Balance Default screen appears.
The current setting is checked (
ä
).
5 Press a button until the White
Balance option you want is highlighted.
q AUTO (Main Default)—adjusts
automatically when flash is used.
Ideal for everyday pictures.
q DAYLIGHT—balances for daylight.
Ideal for indoor pictures under
natural lighting.
q TUNGSTEN—balances for the red-
orange color of household lighting.
q FLUORESCENT—balances for the
green color of fluorescent lighting.
6 Press the DO-IT button to accept the
changes and return to the main Camera
Setup screen.
/
/
To Next Page
Loading...
Need help?
General
