3
1
Checking Batteries
So you are never caught with dead batteries, your camera indicates the
power level of the batteries, in the form of a battery status symbol, which
appears in the Status Display when you turn on the camera.
For information on guidelines for battery usage, see page 91.
1 Set the Mode dial to Capture, Review, or
Camera Settings.
The battery status symbol is not visible if
you set the camera to Connect.
2 Slide the POWER switch to the right to
turn on the camera.
3 Check the battery status symbol that
appears in the Status Display.
q
Full (No Icon)—indicates that batteries
are charged and ready to use.
q
Low—indicates batteries are not fully
charged and will soon need to be
replaced or recharged.
q
Exhausted (blinking)—indicates
batteries are too weak to power the
camera and need to be replaced.
T
W
To Next Page
Loading...
Need help?
General
