Kodak ESP 7 - Location; Environment

www.kodak.com/go/aiosupport 97
KODAK ESP 7 All-in-One Printer
Location
CAUTION:
To prevent your printer from overheating, do not block or cover the slots and
openings in the equipment, place it near a heat register, or install it in a
cabinet without proper ventilation.
CAUTION:
Do not use your printer near water, or spill liquid on it.
Environment
CAUTION:
Excessive dust levels may damage internal parts.
CAUTION:
Unplug the equipment from the electrical outlet before cleaning.
CAUTION:
Dropping your printer may damage the housing and result in extensive
damage that will require replacement or repair by a qualified technician to
restore normal operation.
CAUTION:
Adjust only those controls covered in the user guide or setup instructions.
For more information, go to www.Kodak.com/go/MSDS
WARNING: Do not place your printer on an unstable cart, stand, bracket, or
table; this risks damaging the equipment and injuring people.
WARNING: Do not expose this product to liquid, moisture, or extreme
temperatures. Kodak alternating current (AC) adapters are intended for
indoor use only. The use of controls, adjustments, or procedures other than
those specified herein may result in exposure to shock and/or electrical or
mechanical hazards.