Kodak ESP 7 User Manual

Handling Paper
34 www.kodak.com/go/aiosupport
3. Insert the media into the paper tray, print side down with its near edge against
the paper stop.
4. As needed, squeeze and slide the paper edge guide to align it to the left edge of
the media.
5. Lower the paper output tray.
6. Gently push the tray forward until it is aligned with the edge of the paper output
tray.
Loading photo paper
NOTE: Review Things to keep in mind, page 32.
1. Remove all other paper from the paper tray you plan to use.
2. Insert photo paper into the paper tray print-side down, with the short edge
forward. Do not overload the tray.
3. Slide the paper forward until it stops.
4. Squeeze the paper edge guide and slide it to the right until it just touches the
loaded paper.
5. Lower the paper output tray.
6. Gently push the tray forward until it is aligned with the edge of the paper output
tray.

Kodak ESP 7 Specifications

General

Brand	Kodak
Model	ESP 7
Category	All in One Printer
Language	English