EasyManuals Logo

Kodak ESP 7 User Manual

Kodak ESP 7
120 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #63 background imageLoading...
Page #63 background image
www.kodak.com/go/aiosupport 55
KODAK ESP 7 All-in-One Printer
Cleaning the scanner glass
For good copies and scans, ensure the printer's scanner glass and lid backing are
clean; dust the exterior as needed.
1. Unplug the printer and raise the lid.
2. Clean the glass with a soft cloth or sponge slightly moistened with a
nonabrasive glass cleaner.
3. Dry the glass with a lint-free cloth.
4. When finished cleaning, plug in the printer.
Cleaning the scanner lid
Minor debris can accumulate on the document backing located underneath the
scanner lid of the Kodak printer.
WARNING: Do not use abrasives, acetone, benzene, or carbon tetrachloride
on the glass, as they can damage it. Do not place or spray liquid directly on the
glass. The liquid might seep under the glass and damage the device.
WARNING: Do not use paper-based wipes, as these might scratch the
underside of the scanner lid. Do not use harsh or abrasive cleaners or organic
solvents on the printer or any of its parts.

Table of Contents

Other manuals for Kodak ESP 7

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kodak ESP 7 and is the answer not in the manual?

Kodak ESP 7 Specifications

General IconGeneral
BrandKodak
ModelESP 7
CategoryAll in One Printer
LanguageEnglish

Related product manuals