Kodak ESP 7 User Manual

www.kodak.com/go/aiosupport 15
KODAK ESP 7 All-in-One Printer
Attention Light
Light Status Error
Off None.
Blinks (slow)
The LCD screen describes the error.
Paper jam.
Paper tray empty.
Paper carriage stall.
Paper size or type mismatch.
Change ink cartridge.
Ink cartridge not readable.
Printhead not calibrated.
Unit open, scanner lid open, rear access door open.
Too many image sources.
Printhead not installed.
Unable to read memory card or USB host device.
Blinks (slow) Ink cartridge(s) inserted incorrectly.
Ink cartridge(s) not installed.
On Media sensor failure.
Printhead failure.
Scanner failure.
Memory Card Slot Light
Light Status Cause Action/Solution
Off Either the memory card is not inserted or is
improperly inserted in the card slot.
Remove and reinsert the memory card.
Blinks The internal card reader is initializing or
communicating with a memory card.
None.
On A memory card is properly inserted in the
card slot.
None.

Kodak ESP 7 Specifications

General

Brand	Kodak
Model	ESP 7
Category	All in One Printer
Language	English