Maintaining Your Printer
114 www.kodak.com/go/aiosupport
Monitoring and adjusting printer performance
From the control panel, you can perform tasks to help keep the printer
functioning well.
Checking ink levels
To check the ink levels:
1. Press Home.
2. Press to select Maintenance, then press OK.
3. With Check Ink Levels selected, press OK.
The LCD shows approximate levels of ink in the cartridges so you know when it’s
time to order replacement cartridges. Use 10 Series ink cartridges.
NOTE: You can order ink cartridges online. Open Home Center Software and select
Order Supplies or go to www.kodak.com/go/printingsupplies.
Checking paper levels
To check the paper level:
1. Press Home.
2. Press to select Maintenance, then press OK.
3. Press to select Paper Levels, then press OK.
The LCD shows approximate levels of paper so you know when it’s time to order
more.
NOTE: You can order paper online. Go to www.kodak.com/go/inkjetpaper.
Resetting factory defaults
To reset defaults to the factory default settings:
1. Press Home.
2. Press to select Printer Settings, then press OK.
3. Press to select Reset All Settings, then press OK.
4. When you see the message, “This will reset printer settings to factory defaults,”
press OK.
NOTE: Resetting factory defaults does not change the date and time, language, or
country/region.
To Next Page
Loading...
Need help?
General
