Kodak office hero 6.1 User Manual

www.kodak.com/go/aiosupport 87
KODAK OFFICE HERO 6.1 All-in-One Printer
If you have an answering service:
If you have an answering service that uses a computerized system for recording
messages remotely for the same phone line that you use for your all-in-one
printer, then you can set up a distinctive ring to receive faxes automatically (see
Distinctive Ring under Selecting fax settings, page 88).
If you do not set up a distinctive ring, you can still receive faxes manually (see
Receiving a fax manually, page 100).
Entering fax sender information
Fax sender information appears in the header of any fax that you send from your
all-in-one printer. Typically this is your name or your business name, your fax
number, and your phone number.
NOTE: If you do not enter fax sender information, the header on faxes that you send
will be blank.
To enter fax sender information:
1. Press Home.
2. Press to select Fax Settings, then press OK.
3. With Fax Sender Information highlighted, press
OK.
4. Use the numeric keypad on the control panel to enter:
• your name or business name
• your fax number
• your phone number
See Using the numeric keypad on the control panel to enter text and/or
numbers, page 94.
5. When you are finished entering information in a field, press to move to the
next field.
6. Press OK to save the information.

Kodak office hero 6.1 Specifications

General

Brand	Kodak
Model	office hero 6.1
Category	All in One Printer
Language	English