www.kodak.com/go/aiosupport 33
KODAK OFFICE HERO 6.1 All-in-One Printer
Setting up Cloud Printing
Registering your printer with Google Cloud Print
Your printer lets you print from anywhere in the world using your smartphone,
tablet, or computer that uses GOOGLE Cloud Print enabled apps. You must register
your printer with a GOOGLE Account to enable this feature.
1. Make sure your printer and computer are connected to the same network (see
Networking Your Printer, page 7).
2. Make sure you have the latest version of Home Center Software and printer
firmware (see Updating the software and printer firmware, page 112).
3. Do one of the following:
NOTE: After you select Cloud Printing Setup, the Online Printer Management Tool
opens in your Web browser.
• Open Home Center Software, then click
Cloud Printing Setup.
• Depending on your Operating System, use the path below to select Cloud
Printing Setup.
–WINDOWS XP OS: Select Start > Programs > Kodak > KODAK AiO
Printer Tools, then click Cloud Printing Setup.
– WINDOWS VISTA and 7 OS: Select WINDOWS icon > All Programs >
Kodak > KODAK AiO Home Center > Printer Tools, then click Cloud
Printing Setup.
–MAC OS: Select KODAK AiO Home Center > Tools, then click Cloud
Printing Setup.
4. Follow the on-screen instructions.
5. Sign into your Google Account.
6. In the Google window, click Finish printer registration.
7. Return to the Online Printer Management Tool. Wait until you see Registration
Successful for Google Cloud Print. This may take a few minutes.
8. To register your printer with KODAK Email Print Service and get an email
address for your printer, go to step 3 of Registering your printer with KODAK
Email Print Service, page 34
9. Sign out of your Google Account.
For information about printing, see Printing using Google Cloud Print, page 58.
To Next Page
Loading...
Need help?
General
