Kodak office hero 6.1 User Manual

www.kodak.com/go/aiosupport 67
KODAK OFFICE HERO 6.1 All-in-One Printer
Copying a photo
You can copy a photo using the default settings, or you can make adjustments to the
quantity, size, quality, and brightness of your copies.
Using the default settings to copy a photo
The default settings are either the factory default settings (see Resetting factory
defaults, page 114), or defaults that you have set on the printer (see Save as Defaults
at the bottom of the table under Adjusting the settings and copying a photo,
page 68).
To copy a photo using the current default settings:
1. Lift the scanner lid, and place the original photo face down in the right front
corner of the scanner glass.
IMPORTANT: Do not load photos in the Automatic Document Feeder (ADF).
2. Close the scanner lid.
3. Press Home.
4. Press to select Copy Photo.
5. Press Start Black to make a black-and-white copy, or press Start Color to make
a color copy.

Kodak office hero 6.1 Specifications

General

Brand	Kodak
Model	office hero 6.1
Category	All in One Printer
Language	English