Kodak office hero 6.1 User Manual

www.kodak.com/go/aiosupport 91
KODAK OFFICE HERO 6.1 All-in-One Printer
To adjust fax settings from the Online Printer Management Tool:
1. Open the Online Printer Management Tool in a browser (see Accessing the
Online Printer Management Tool, page 18).
2. Select the Settings tab, then select Fax > Settings.
3. Change the Sender Information and/or fax Settings as needed.
4. Click Save to update the settings.
Setting the answer mode (auto answer or manual)
The default setting for Auto-Answer is on. When Auto Answer is on, the printer
picks up all incoming faxes automatically. The green Auto Answer LED is lit when
Auto Answer is on.
To answer calls manually, turn off Auto Answer by pressing the Auto Answer button
so that the green LED is off. (See Receiving a fax manually, page 100.)
Dialing Mode Tone (default) / Pulse Determines how the printer dials a fax
number.
Tone dialing (the more common
method) uses tones to dial a phone
number. It is faster and more reliable
than pulse dialing, which uses a series of
pulses to dial a phone number.
Traditionally, pulse dialing was used by
rotary phones; tone dialing is used by
touch-tone phones.
Error Correction On (default) / Off Error correction is applied only when
sending black-and-white faxes. It
reduces the loss of data, which can occur
on poor phone lines.
Error correction increases the send time
on poor phone lines, but the
transmission is more reliable. (Error
correction does not apply to faxes being
received.)
If you are using Vonage or Magic Jack,
we recommend that you set Error
Correction to OFF.
Fax Setting Options Description

Kodak office hero 6.1 Specifications

General

Brand	Kodak
Model	office hero 6.1
Category	All in One Printer
Language	English