《Basics》 screen at 《Divide Strip》
Select 《Double Strip》 on the 《Motion》 screen （P.11）.
①《Front Strip Length》：Setting of the stripping length of the front side
insulation.
②《Front Hal Strip Length》：Setting of the half stripping length of
front side of the wire
③《Front Disintermidiate Length》：Setting of the insulation length
of front side which is not stripped.
④《Total Length》：Setting of the cutting length of the wire.
⑤《Rear Strip Length》：Setting of the stripping length of the rear side
insulation.
⑥《Rear Half Strip Length》：Setting of the half stripping length of
rear side of the wire.
⑦《Rear Disintermediate Length》：Setting of the insulation length
of front side which is not stripped..
To Next Page
Loading...