EasyManua.ls Logo

KODERA CASTING C371A - Precautions for Use

KODERA CASTING C371A
30 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1
Safety Precautions
If you do not operate the device properly, it may result in failure or accident. Please read this
instruction manual carefully before operating this device.
In this manual, safety instructions are indicated with “CAUTION” or “WARNING”.
WARNINGIf you do not observe this item properly, it may result in death or severe injury.
CAUTIONIf you do not observe this item properly, it may result in moderate disorder, light
injury or material damage.
Precautions for Use
WARNINGDon’t put your hands close to the blades.
It may result in injury.
WARNINGDon’t place combustible spray such as pesticide or paint close
to the fan, or spray it into the fan.
It may result in fire.
CAUTIONDon’t put your hands close to the guide pipe during processing.
It may result is injury because the guide pipe is moving.
CAUTIONDon’t put your hands close to the roller during processing.
It may result in injury because the roller is rotating rapidly.
CAUTIONDon’t operate the power switch with a wet hand.
It may result in electric shock.
CAUTIONDon’t sprinkle water over this unit.
It may result in electric shock or fire.
CAUTIONDon’t block the fan.
It may overload the device and cause the failure.
CAUTIONObserve the capacity of circuit breaker and fuse.
Don’t use wire instead of fuse.
When the circuit breaker trips or blowout of the fuse occurs often, consult your sales
distributer.
CAUTIONIf abnormal smell such as burnt smell is detected, stop the
operation and turn the power off. Contact your sales distributer.
If you continue the operation under abnormal condition, it may result in failure, electric
shock or fire.
CAUTIONDon’t stand or put an object on the unit.
It may result in injury due to drop or fall over.
CAUTION Before cleaning, maintenance or inspection, make sure to
remove the power cable and check if the device is not energized.
It may result in injury or electric shock.
CAUTIONContact your sales distributer for repair.
Improper repair may result in electric shock or fire.