⑦《Specified Number》：When 《Number of Specified》 at ② has been selected, set how
many times to mark on a wire at even intervals.
⑧《Print Interval》《Rear Print Point》：
When 《Both Ends Marking》《Separate Marking》 have been selected, 《Rear
Print Point》is displayed.
When others are selected, display is changed to 《Print Interval》.
Rear Print Point：Setting point to print at the rear side.
（Distance from the terminal of the rear side of the wire）
Print Interval：When selecting 《Even-Spaced Marking》 at ①, input the interval
of printing.
⑨《Standby Time》：Input the time from the stopping of the output power of the sign to the
marker to the beginning of the motion of C371A .
Items to be set and displayed
Stamp
Inkjet
To Next Page
Loading...