Kohler Industrial Generator Set - Genset Information; Genset Run Time; Genset System

TP-6694 7/1854 Section 2 Operation
Momentarily press the pushbutton/rotary selector dial.
Stop the generator set if not already done.
Generator Metering
Generating---->
Metering
Rated Power:
#%
Total Power:
#VA
Total Power:
#W
Volts L2--L3:
#.# V
Volts L1--L2:
#.# V
Volts L1--N:
#.# A
Volts L3--L1:
#.# V
Volts L3--N:
#.# A
Volts L2--N:
#.# A
Current L2:
#.# A
Current L1:
#.# A
Frequency:
#.# Hz
Current L3:
#.# A
Select this Display to
Enable or Disable
Calibration -->
Reset
Calibration
Reset
Calib? No
Reset
Calib? Yes
OR
2.7.5 GenSet Information
Displays generator set and controller information.
Displayed data is factory entered.
GenSet Information
GenSet ---->
Information
Cntrllr S/N:
##
Genset M/N:
##
GenSet S/N:
##
2.7.6 GenSet Run Time
Displays the generator set’s operating record including
total run time loaded and unloaded, number of starts,
and total energy kW hours.
GenSet Run Time
GenSet ---->
Run Time
Eng Starts:
#
Eng Runtime:
##.# h
Eng Loaded:
#.# h
TotalEnergy:
#.# kWh
2.7.7 GenSet System
Display shows the generator set system data including
voltage, frequency, phase connection, etc. Use the
values entered in this menu to help determine shutdown
values and time delays.
The programming user defines the data shown in the
GenSet System menu. It is NOT data measured by the
controller and associated sensing devices. The
programming user defines these values for purposes of
calibrating the control.
Some alternators are designed to operate at limited
voltage, frequency, or phase connections and as a result
some settings may have limited parameters.
Display for Measurement System is user selectable as
English o r Metric.
Contrast display is user adjustable to help improve
digital display visibility in dimly lit rooms or in d irect
sunlight.