22
ALL FACTORY SETTINGS
PRESS 1P LEFT / RIGHT = MODIFY SETTING
PRESS 1P START BUTTON = EXECUTE
If "YES" is selected, the question for re-confirmation
appears on the screen.
DO YOU WANT ALL FACTORY SETTINGS? YES / NO
VIEW BOOKKEEPING INFORMATION
COIN DATA BY THE HOUR
PRESS 1P LEFT / RIGHT = PREV / NEXT PAGE
PRESS 2P START BUTTON = DATA CLEAR
PRESS 1P START BUTTON = EXIT
Total number of coins per hour.
00
: 00 0
01
: 00 0
02
: 00 0
03
: 00 0
04
: 00 0
05
: 00 0
06
: 00 0
07
: 00 0
08
: 00 0
09
: 00 0
10
: 00 0
11
: 00 0
12
: 00 0
13
: 00 0
14
: 00 0
15
: 00 0
16
: 00 0
17
: 00 0
18
: 00 0
19
: 00 0
20
: 00 0
21
: 00 0
22
: 00 0
23
: 00 0
LAMP CHECK
Mode for checking various button and control indicators for lighting.
Press the 1P select button to select a lamp to be lighted and press the 1P start
button. (The lamp lights up as long as the button is pressed.) If “ALL” is selected,
all the lamps light up one after another.
To return to the main menu screen, select “EXIT” and press the 1P start button.
Checking various lamps for lighting
•This screen is just an example.
5 Game settings
ALL FACTORY SETTINGS
Mode for returning all the settings to the factory settings at the time of shipping.
Press the 1P select button to select “YES” or “NO”, and press the 1P start button for entry.
If “YES” is selected, the question for re-confirmation appears on the screen. If
“YES” is selected again, the “NOW SAVING” message appears on the screen and
all the data of settings in test mode are saved as was set at the time of shipment and
the main menu appears again automatically.
If “NO” is selected, “NO MODIFICATION” is indicated and the main menu appears
again without saving the data of changed settings.
Returning all the settings to factory ones
•This screen is just an example.
Screen of the total number of coins per hour.
To Next Page
