EasyManua.ls Logo

Konami Dance Dance Revolution - Electrical Safety and Installation

Konami Dance Dance Revolution
66 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
•Be sure to use indoor wiring for within the specified voltage range. For extension
cord, use indoor wiring of the specified rating or more.
·Failure to do so could result in fire or equipment failure.
•Be sure to use the attached power cord.
·Otherwise a fire or machine trouble may result.
•Never plug more than one cord at a time in the electrical receptacle.
·Doing so could result in fire or electrical shock.
•Do not lay the power cord where people walk through. You may tread on or stumble
over them.
·You may stumble down and get injured, or damage the power cord.
•Be sure to ground this product.
·Otherwise an electric shock or machine trouble may be caused.
•Clearance of 100 mm (3.94in) or more should be created between the game
machine and walls.
·Otherwise the machine (s) cannot be ventilated well, resulting in malfunction.
•Do not hold the unit connection pipe when moving this product.
·Otherwise, it may result in an injury or accident.
•After the units are connected, never move the product across a step.
·Otherwise, it may result in an injury or accident, or damage to the units.
•Provide a clearance of more than 200 mm (8 in) and less than 400 mm (16 in) between
the stage units and the cabinet unit.
·If a player sticks his foot between the units, he may be injured. If a too large clearance is
provided, a player who is on way of stepping down from the stage units may step on the
unit connection pipe and tumbling down, resulting in a serious injury.
•Do not change the DIP switch setting of this product to other than factory setting.
·Otherwise, the game can not be played properly.
Setting Up
4
Precautions for use
CAUTION
Operation
WARNING
•If there is any abnormality such as smoke, bad smell or abnormal noise being
emitted from the machine, immediately turn OFF the main power switch and unplug
the power cord from the receptacle to stop operating it.
·Using the machine in abnormal conditions could result in fire or accidents.
In case of abnormality
1 Turn OFF the main power switch.
2 Unplug the power cord from the receptacle.
3 Contact your nearest dealer.
•Do not leave the power cord plugged improperly or covered with dust.
·Doing so could result in electrical shock or fire, so inspect the power cord periodically.

Related product manuals