AS-11.65.037
14 (40) (A) 2009-10-16
KDL16
Maintenance Instruction
© 2009 KONE Corporation
All rights reserved.
Disclosure prohibited
4TOOLS
Part number Tool Illustration/Note
Normal hand tool set
RS232 port
Correct LCE software
If LCE software version is older than 5.1.0
(Real time display not available)
Counterweight lifting device
Torx screwdriver TX10
Test weights For LWD setup, according to rated load, only
KONE ReGenerate™ elevators
Multimeter Fluke 179 (or equivalent) with insulated test
probes (min. L = 100 mm) specified to 1000
VDC voltage
KM265173 Work stool Height approximately 750 mm
KM871952 Door blocking tool
To Next Page
