Kone UniDrive - User Manual

Need help?

Do you have a question about the Kone UniDrive and is the answer not in the manual?

Summary

1. Main Manual

1.1. General Information and Safety

Covers system purpose, safety, and qualified personnel requirements.

1.2. UniDrive Component Overview

1.3. Connections

1.3.1. Connection Terminal Overview

Provides a diagram of the UniDrive™ connection terminals.

1.4. DIPSWITCHES

1.6. Starting-up Cycle

Guides through the initial setup and self-test procedure.

1.9. Battery Functions

1.9.1. Power Fail Action

Lists actions taken during power failure with battery support.

1.10. Service Displays

1.10.3. Error Signal on Display 2

Details error codes and their possible solutions.

2. Appendix UniDrive

2.1. Standard I;O Description

Describes standard inputs and outputs and their functions.

2.2. Function Descriptions

2.2.1. Locking Devices

Explains different types of locking devices and their connections.

2.2.5. NS, Timer Mode; Porter Mode

2.2.7. Auto Close

2.2.8. Program Switch Functions

2.2.10. Programmable Inputs and Outputs

Introduces programmable I/O capabilities.

2.2.10.1. Programmable Input Functions

2.2.10.2. Programmable Input Flags

2.2.11. Programmable Outputs

2.2.11.1. Programmable Output Functions

Lists and describes programmable output functions.

2.2.11.2. Programmable Output Flags

2.2.12. Software Settings

Covers general software configuration options.

2.2.12.1. Speed Settings

Explains how to configure opening and closing speeds.

2.2.13. Timer Settings

Details various timer functions available in the software.

2.2.14. Winter Opening Position

2.2.15. Battery Unit

Details the operation and testing of the battery unit.

2.2.16. Battery Pack

Explains the function and testing of the battery pack.

2.3. Software Selections

2.3.2. Motor Type

Explains the process of programming motor types.

2.3.4. Close (DIN18650 - vs 1.35)

2.3.5. Open (DIN18650 - vs 1.35)

2.3.8. Function Close at Error (vs 1.35)

2.6. Motors

2.6.1. Motor Types

Lists PSION identifiers and remarks for encoder cables.

2.6.2. Motor Connections

2.6.2.1. Besam EMJ

2.6.2.2. Besam Unislide GR 63 x 25

2.6.2.3. Besam Unislide GR 63 x 55

2.6.2.4. Dorma ES 90;100

2.6.2.5. Dorma DAC 250

2.6.2.6. Dorma CS

2.6.2.7. Geze Slimdrive

2.6.2.8. Waldoor UWS 2400 2000

2.6.2.9. Record STA 18

2.6.2.10. Portalp Diva

2.6.4. Unidrive Tandem Operation

Safety Considerations for Tandem Operation

Discusses necessary safety measures for tandem setup.

2.6.5. Locking Devices Several Types

2.6.5.1. Besam EMJ;Unislide;Dorma DAC;Dorma CS;Dorma ES90_100;KONE

Wiring and settings for various locking devices.

2.6.5.2. Locking GEZE Slimdrive

2.6.5.3. Locking Record STA 18

2.6.5.4. Locking Portalp Diva

2.7. Safeties

2.7.1. Side Screen Protection

2.7.2. Obstacle Detection

Explains the obstacle detection system and its parameters.

2.7.3. Obstacle Detection Closing

Details how obstacle detection works during closing.

2.7.4. Obstacle Detection Opening

2.8. Default Settings

Function and Setting Descriptions

2.9. Priority Table

2.10. Psion Settings

MAIN MENU Settings

PGS Menu Settings

Options Menu Settings

2.10. Psion Settings (continued)

In-;output Menu Settings

Details programmable inputs and outputs via Psion.

Motor Type Selection via Psion

Dipswitch Menu via Psion

Lockmenu via Psion

2.11. Added Functions in UniDrive Software Version 1.35 and Psion 1.30

Function Enhancements Overview

2.12. Changed Functions in UniDrive Software V1.35

Functional Changes Summary

Kone UniDrive Specifications

General

Brand	Kone
Model	UniDrive
Category	Control Unit
Language	English