Konftel 800 - Setting up a Conference Call

TELEPHONY OPERATIONS
• Konftel 800 and four external participants using PCMA or PCMU. Here, the
total weight of external participants is 80.
• Konftel 800 and three external participants using PCMA or PCMU and one
external participant using G722 or G729. Here, the total weight of external
participants is 93.
• Konftel 800 and two external participants using OPUS or iLBC. Here, the total
weight of external participants is 100.
The phone does not allow for the total weight to exceed 100. If the total weight is
greater than 100, the phone rejects the last participant who attempts to join the
conference.
The administrator can configure a lower weight codec if needed.
Conference call operations
Konftel 800 supports the following conference call operations:
• Setting up a conference call
• Adding participants to a conference call
• Putting a participant of a conference call on hold
• Talking to a participant of a conference call privately
• Splitting a conference call
• Dropping a participant from a conference call
Setting up a conference call
About this task
Use this procedure to set up a conference call on your phone.
Procedure
On the phone screen, tap the Call icon.
The phone displays the
Dialpad view.
Dial the number of the first party to include in the conference call.
When the party answers, tap Add Participant.
The phone displays the
Add Participant screen.
Dial the number of the second party to include in the conference call. You can
do it as follows:
• Choose the number in the
Recent tab from the recent calls list.
• Dial the number using the
Dialpad.
• Choose the number in the
Contacts tab from the LDAP phone book.
22