TELEPHONY OPERATIONS
Ringtone
The ring signal you hear on Konftel 800 in case of an incoming Bluetooth
®
call
depends on specifications of the mobile Bluetooth
®
device. The options are as
follows:
• If your mobile device supports in-band ringtone, Konftel 800 plays the signal it
receives from the connected Bluetooth
®
device.
• If your mobile device does not support in-band ringtone, Konftel 800 plays its
local ringtone or remains silent depending on its
Ring Level setting.
Related tasks
Pairing and connecting Bluetooth® devices on page 40
Handling incoming Bluetooth® calls
About this task
You can use Konftel 800 to handle calls coming to your mobile device if the two
devices are in a paired and connected state. When you receive an incoming call
on your mobile device, the LEDs on Konftel 800 start flashing green, the phone
rings and displays the caller ID and the following message: Incoming Call. You
can use Konftel 800 to answer or reject the call.
Before you begin
Ensure that Konftel 800 and your mobile device are in paired and connected state.
Procedure
• When the phone rings, do one of the following:
• To reject the call, tap the
Hang Up icon.
• To answer the call, tap the
Answer icon.
When you answer the call, the LEDs on Konftel 800 show a steady green light,
the phone displays the caller ID and the following message: Bluetooth
call.
• To end an ongoing call, tap the
Hang Up icon.
Related tasks
Pairing and connecting Bluetooth® devices on page 40
26
To Next Page
Loading...
