Konftel 800 - Configuring the Konftel Unite Settings; Konftel Unite Settings

PHONE MANAGEMENT APPLICATION
Configuring the Konftel Unite settings
About this task
Use this procedure to configure the Konftel Unite settings from the application
installed on a mobile device.
Procedure
Run Konftel Unite on your mobile device.
Optional: Connect to Konftel 800.
The phone displays a connection symbol on the screen.
Tap Settings and proceed with configuration.
Konftel Unite settings
The following table lists the parameters for Konftel 800, which you can set from
the Konftel Unite interface:
Name Description
Connection To enable or disable the connection to Konftel 800. The
options are:
• On: The default option.
• Off: To use Konftel Unite without connection to any
Konftel 800. You can use the conferencing application
from your mobile device within your mobile phone
subscription.
Moderator code To join the scheduled conference calls as a moderator. You
must enter respective codes in the following fields:
•
Use moderator code: To host conference calls over a
bridge service. For every call you join, Konftel Unite
uses your moderator code instead of your guest code.
•
Instead of guest code: To specify the guest code instead
of which Konftel Unite uses your moderator code.
Dial prefix To enter the prefix digits in the Use prefix field.
Table continued…
48