CONNECTIVITY
In case of a successful Bluetooth
®
Classic connection, Konftel 800 restores
Bluetooth
®
LE mode when you end the Bluetooth
®
Classic connection.
Pairing and connecting Bluetooth® devices
About this task
To enable Bluetooth
®
communication between Konftel 800 and another Bluetooth
®
device, you must pair the two devices and ensure that they are in a connected
state. The devices stay in a paired state until you remove the pairing.
You can connect only one device supporting Bluetooth
®
at a time.
Procedure
On the Konftel 800 screen, tap Settings > Bluetooth > Pair with device.
The LEDs start flashing blue, and the phone displays the following message:
This phone is now discoverable as “<Phone Name>”.
The time-out value for discoverable mode is 120 seconds.
Tap Cancel to cancel pairing, for example, if you do not want to make the
phone discoverable. In this case, you return to the Bluetooth menu.
On your Bluetooth
®
device, find Konftel 800 in the list of devices available for
Bluetooth
®
connection and tap the phone name.
Konftel 800 establishes the connection with the Bluetooth
®
device and displays
the Bluetooth
®
icon and one of the following messages:
• If Konftel 800 retrieves the device name from your Bluetooth
®
device, it
displays Connected to <your Bluetooth device name>. For
example, Connected to My Smartphone.
• If Konftel 800 does not retrieve the device name from your Bluetooth
®
device, it displays Connected to <your device Bluetooth
address>. For example, Connected to 00:11:22:33:FF:EE.
Konftel 800 is not visible in the Konftel Unite application while the
conference phone and the Bluetooth
®
device are in the connected state.
Related concepts
Phone settings description on page 33
40
To Next Page
Loading...
