Konftel 800 - Connection between Paired Bluetooth Devices; Disconnecting Bluetooth Devices

CONNECTIVITY
Connection between paired Bluetooth® devices
Connection
After you pair Konftel 800 and your Bluetooth
®
device, the two devices establish
the connection.
Disconnection
The connection ends if you manually disconnect Konftel 800 from the Bluetooth
®
device or if the distance between the devices does not allow to maintain the
communication.
When the Bluetooth
®
device ends the connection, Konftel 800 displays the
following message: Disconnected and then stops displaying the Bluetooth
®
icon.
Reconnection
You can reconnect your Bluetooth
®
device to Konftel 800 if the two devices are in
a paired state. You can reconnect Konftel 800 to the paired Bluetooth
®
device only
from the paired Bluetooth
®
device.
Disconnecting Bluetooth® devices
About this task
You can disconnect Konftel 800 from your Bluetooth
®
device.
When you end the connection between Konftel 800 and your Bluetooth
®
device,
the two devices remain in the paired state.
Disconnecting the devices using this procedure does not affect the connection
to Konftel Unite.
Before you begin
Ensure that Konftel 800 and the Bluetooth
®
device are in the connected state.
Procedure
Tap
Settings > Bluetooth > Disconnect Device.
The phone displays the following question: Disconnect device
<Bluetooth Device Name>?
If Konftel 800 and the Bluetooth
®
device are not paired and connected, the
phone displays the following message: Not connected.
Tap Ok to confirm disconnection.
41