CONNECTIVITY
Before you begin
Prepare USB micro Type B receptacle for connection purposes.
Procedure
Use the USB cable to connect the phone and the computer.
The Konftel 800 screen shows that the USB is connected.
Optional: Access the computer settings and select the phone as the audio
device. The computer operating system automatically selects the phone as a
speaker and microphone.
Optional: Restart the software to switch to the new audio device if the computer
has active software that is using built-in speakers of the computer.
Managing VoIP calls through a PC
About this task
Use this procedure to manage VoIP calls through a personal computer or a laptop.
The phone functions as a speaker and microphone for the PC.
If you receive an incoming VoIP call during an active USB call, the phone indicates
the incoming call with a ring tone and LEDs flashing.
Before you begin
• Turn on the PC.
• Connect Konftel 800 with the USB receptacle to the PC.
• Select Konftel 800 as the audio device in the computer settings.
• Run the VoIP software.
Procedure
In the VoIP software, select the contact to call.
Dial the number and talk to your contact.
End the call in the computer VoIP software.
The phone functions as a speaker for the computer.
BLUETOOTH® CONNECTION
Konftel 800 can establish wireless communication over Bluetooth
®
with devices
equipped with Bluetooth
®
connectivity, such as mobile phones, tablets, or
computers. With Bluetooth
®
, you can use the phone as a speakerphone for call
handling, or as an audio receiver for audio streaming.
38
To Next Page
Loading...
