PHONE MANAGEMENT APPLICATION
KONFTEL UNITE
You can manage your Konftel 800 from a mobile phone or a tablet if you have
Konftel Unite installed on the device. Download and install Konftel Unite free from
App Store and Google Play like any other application. Use the NFC tag to easily
start downloading the application. For that, you must bring the mobile device with
the NFC enabled to the NFC tag on the conference phone, and the web browser
on the mobile device opens the web page with the application in App Store or
Google Play.
With Konftel Unite, you can call contacts from your local address book, create
conference groups, and control a call. For example, answer and hang up the call,
mute and unmute the microphone, dial a number, adjust the volume level, and
hold and resume the call.
The mobile device with Konftel Unite is connected to the phone over the built-in
Bluetooth
®
LE. Konftel 800 is always discoverable for this connection.
If your conference phone fails to connect to Konftel Unite, you must download
a newer version of the application from App Store or Google Play. It works both
with R 1.0.4 and earlier released firmware.
Configure Konftel Unite parameters on the phone and from the mobile device with
the application installed.
Pairing and connecting devices
About this task
Use this procedure to pair your Konftel 800 with Konftel Unite on your mobile
device the first time when you use them together. After that, they connect with one
touch when you run the application near the conference phone.
The connection range is up to 20 meters. The connection breaks if this range is
exceeded. You see a request to reconnect when Konftel Unite is within the range
of Konftel 800. Reconnection requires only one touch.
You can pair up to 100 mobile phones or tablets with your Konftel 800. But only
one user connection is active at a time.
Procedure
On your mobile device, open Konftel Unite.
The mobile phone displays the closest Konftel 800.
43
To Next Page
Loading...
