PHONE MANAGEMENT APPLICATION
To select the phone you want to connect, perform one of the following actions:
• If your mobile device displays Konftel 800 you want to connect, tap
Connect on the mobile device screen.
• If your mobile device does not display Konftel 800 you want to connect, tap
Skip and then tap the connection symbol in the upper left corner of your
mobile device screen.
The mobile device displays the list of available conference phones.
The mobile phone displays a pairing code for about 30 seconds.
Enter the code with the keypad on the conference phone.
Tap Enter on the conference phone to start pairing.
When the devices are paired, both Konftel Unite and Konftel 800 display the
connection symbol.
The conference phone and Konftel Unite remain paired while they are close to
one another.
You cannot connect Konftel 800 to a Bluetooth
®
device for call handling or
audio streaming while the Konftel Unite connection is active.
Disconnecting devices
About this task
Use this procedure to disconnect your Konftel 800 from the mobile device with
Konftel Unite installed.
Before you begin
Ensure that Konftel 800 is connected to a mobile device with Konftel Unite
installed.
Procedure
• To disconnect from the mobile device, do the following:
In Konftel Unite, tap the connection symbol in the upper left corner of the
screen.
Tap the
Disconnect button near the highlighted connected device name.
The connection symbol in the upper left corner of the screen becomes
inactive.
• To disconnect from Konftel 800, do one of the following:
• Tap
Konftel Unite > Disconnect Device.
• Tap
Settings > Konftel Unite > Disconnect Device.
44
To Next Page
Loading...
