TELEPHONY OPERATIONS
The phone drops the participant from the conference call.
Splitting a conference call
About this task
Use this procedure to split an ongoing conference call into several calls.
Before you begin
Start a conference call.
Procedure
On the phone screen, tap the
Split icon.
The phone places all participants to separate calls and puts the calls on hold.
Next steps
• To resume the call with any one of the participants, tap the entry of the
participant and then the
On Hold icon.
• To connect all the separate calls to the conference call, tap the
Conference
icon.
BLUETOOTH® CALLS
You can use Konftel 800 to handle the phone calls coming to your mobile device.
This functionality is available when you pair the phone with your mobile device,
and the two devices are in a connected state.
Konftel 800 supports the following Bluetooth
®
call operations:
• Answering a call
• Rejecting a call
• Ending a call
You can handle Bluetooth
®
calls only when Konftel 800 is in On-hook mode.
The phone does not support Bluetooth
®
calls in Off-hook mode during a SIP or
USB call.
Handling Bluetooth
®
calls from Konftel 800 affects incoming SIP and USB
calls. When the phone is on a Bluetooth
®
call, it sends a busy signal to other
incoming calls. Also, accepting a Bluetooth
®
call blocks any ongoing USB
audio stream.
25
To Next Page
Loading...
