CONNECTIVITY
Konftel 800 displays Disconnected and then stops displaying the Bluetooth
®
icon.
To cancel the disconnection, tap Cancel.
Removing Bluetooth® pairing
About this task
Use this procedure to remove the pairing between Konftel 800 and your other
Bluetooth
®
device to delete unwanted pairings.
Removing Bluetooth
®
pairing as described below does not affect Konftel Unite
pairing information.
Before you begin
Ensure that Konftel 800 and the Bluetooth
®
device are in the paired state.
Procedure
Tap
Settings > Bluetooth > Remove pairing.
The phone displays the following question: Do you want to remove all
Bluetooth pairing information from the phone?
To confirm that you want to delete the Bluetooth
®
pairing information, tap Ok.
The phone restarts the application to apply the changes.
BRIDGE CONNECTION
Konftel 800 supports bridging all connected devices within the external dial-in
conference calls. You can connect Konftel 800 to SIP server using Ethernet and
also connect Konftel 800 to a laptop, a deskphone or a PC using USB. Konftel 800
can bridge all these connections together into a combined call.
When bridging your computer and the phone, you must activate both sources of
sound. Konftel 800 can handle full duplex, echo cancellation, and noise reduction
for all bridged sound sources simultaneously. The sound from the bridged
computer and SIP call can have different levels. To hear all participants of the
conference call clearly, adjust each sound source individually.
Konftel 800 does not support bridging of Bluetooth
®
calls with SIP and USB calls.
42
To Next Page
Loading...
