Konica Minolta bizhub 4000P Service Manual

bizhub 4700P/bizhub 4000P Service Manual
- 139 -
4.8 Input option hardware errors
4.8.1 3xx error messages
Error code
Description
Action
321.51
ACM motor no first encoder
Go to Option tray pick/lift section service check.
321.52
ACM motor stop error
321.53
ACM motor PWM underflow (motor
overspeed)
322.54
Separator/Pass-through motor no first encoder
Go to Option tray separator/pass-through motor
service check.
322.55
Separator/Pass-through motor stop error
322.56
Separator/Pass-through PWM underflow
(motor overspeed)
324.57
ACM motor no first encoder
Go to Option tray ACM motor service check.
324.58
ACM motor stop error
324.59
ACM motor PWM underflow (motor
overspeed)
325.60
Hardware error—Board ID unknown
Go to Option tray controller card service check.
325.61
Hardware error—Option type unknown
325.62
Hardware error—Product ID unknown
325.63
Hardware error—Sensors are not plugged on
the board.
331.51
ACM motor no first encoder
Go to Option tray pick/lift section service check.
331.52
ACM motor stop error
331.53
ACM motor PWM underflow (motor
overspeed)
332.54
Separator/Pass-through no first encoder
Go to Option tray separator/pass-through motor
service check.
332.55
Separator/Pass-through motor stop error
332.56
Separator/Pass-through motor PWM
underflow (motor overspeed)
334.57
ACM motor no first encoder
Go to Option tray ACM motor service check.

Konica Minolta bizhub 4000P Specifications

General

Print Technology	Laser
Print Speed	Up to 42 ppm
Resolution	1200 x 1200 dpi
Monthly Duty Cycle	Up to 100, 000 pages
Standard Output Capacity	150 sheets
Memory	256 MB
Supported Operating Systems	Windows, Mac OS, Linux
Duplex Printing	Automatic
Connectivity	USB 2.0, Ethernet
PDL	PCL 6, PostScript 3, XPS
Processor Speed	1.2 GHz